Forum > TGIF Hotspot Configurartion

Dual TS board 2 newtworks

(1/2) > >>

KA1MXL:
I am looking for the instructions that were posted awhile back to configure a dual slot board to work with 2 masters. So I could have TGIF on slot#1 and another master on slot#2.

Thanks

KD5TJG:
Not sure if this is what you are looking for - but I kept it around as I wanted to do the same thing...not had time to test.
Here is a link to the Pi-Star Forum talking about using 2 timeslots.

https://forum.pistar.uk/viewtopic.php?f=5&t=1154&fbclid=IwAR24Fn5R-08Xrel6j5oYJ01FJ___-J-DDlXEhTuwxXiF9KJGXSaG_GgxWWI

-Jason/KD5TJG

KA1MXL:
Thanks Jason, so when using this method I use the 5xxxx tg# is that correct?

KD2RMT:
Hello ... I tried to get this to work and was not able.  I follow the directions to the letter.   Please let me know if anyone has been able to get it to work. 

I also tried these instructions which seems more detailed but it did not work either.  Right now for my duplex I can only do BM or TGIF but not both.

Thanks!

K5MRE:
Here's my DMRGateway config that works fine.

This puts Brandmeister on Slot 1 and TGIF on Slot 2.  I recommend you have TGIF on Slot 2 so you can use selfcare since it currently only acts on Slot 2 right now.

The key lines are the 'PassAllTG' lines that mark either slot 1 or slot 2 as the dedicated slot.

[DMR Network 1]
Enabled=1
Address=74.91.114.19
Port=62031
PassAllPC1=1
PassAllTG1=1
Password="passw0rd"
Debug=0
Name=BM_United_States_3102

[DMR Network 3]
Enabled=1
Name=TGIF
Address=tgif.network
Port=62031
Password=passw0rd
Location=0
Debug=0
PassAllPC1=2
PassAllTG1=2

Navigation

[0] Message Index

[#] Next page