Author Topic: Pi-Star Configuration for TGIF  (Read 5791 times)

0 Members and 0 Guests are viewing this topic.

Offline N3MEL

  • Administrator
  • Jr. Member
  • *****
  • Posts: 57
  • Referrals: 0
  • Call Sign: N3MEL
Re: Pi-Star Configuration for TGIF
« Reply #15 on: February 07, 2020, 10:27:05 pm »
In the section where you selected the TGIF network do you select a number in the next box down ESSID?
Glenn, N3MEL

Offline W2XQ

  • Newbie
  • *
  • Posts: 4
  • Referrals: 0
Re: Pi-Star Configuration for TGIF
« Reply #16 on: February 07, 2020, 11:56:27 pm »
No I didn't. The dropdown is 'None'. For TGIF, if this should be a 2-digit number, what is the rationale? Thanks.

Offline N3MEL

  • Administrator
  • Jr. Member
  • *****
  • Posts: 57
  • Referrals: 0
  • Call Sign: N3MEL
Re: Pi-Star Configuration for TGIF
« Reply #17 on: February 08, 2020, 04:15:13 am »
It is used to give your hotspot a unique identity so you can run Multiple hotspots on the same network, TGIF requires a number in that box.. Start with 01 and go from there as needed.
Glenn, N3MEL

Offline W2XQ

  • Newbie
  • *
  • Posts: 4
  • Referrals: 0
Re: Pi-Star Configuration for TGIF
« Reply #18 on: February 08, 2020, 11:52:10 am »
Understand, but in my case I have only the one hotspot in the house.

Just toggljng BM > TGIF_Network. Are you saying I also have to add a 0x to the hotspot ID when switching to TGIF? Thanks.

Offline W9DWH

  • Newbie
  • *
  • Posts: 3
  • Location: Owensboro, KY
  • Referrals: 0
Re: Pi-Star Configuration for TGIF
« Reply #19 on: March 06, 2020, 07:38:20 pm »
When using self care to navigate the talkgroups I momentarily key up on TG 9, enter the talkgroup I want to use and then update. It works fine for me except for transmitting.  Nobody can hear me.  If I go directly to the talkgroup, on my radio, then I come through fine.  The correct DMR ID is entered into my hotspot and I set an ESSID as well.  Anyone have any ideas as to what the issue might be?
« Last Edit: March 06, 2020, 07:52:33 pm by W9DWH »

Offline WB3IHY

  • Jr. Member
  • **
  • Posts: 66
  • Location: Northeast Philadelphia, Pennsylvania
  • Referrals: 0
    • QRZ Profile
Re: Pi-Star Configuration for TGIF
« Reply #20 on: March 07, 2020, 08:10:38 am »
When you change the talkgroup in self-care, it only changes the talkgroup that your hotspot is tuned to, not the radio.  The radio will receive transmissions from the newly tuned talkgroup but retains the channel information programmed into it from its codeplug.

So, if you key up, the radio will use that information and bring you back to the original talkgroup programmed into that channel.

On some radios with certain firmware, you can temporarily override the programming by hitting keys to ad-hoc to the talkgroup being transmitted by the hotspot.  Or, if you have the talkgroup already programmed into a channel, you can just switch to it and your next transmission should go out there.

Hope that all makes sense.

Offline W9DWH

  • Newbie
  • *
  • Posts: 3
  • Location: Owensboro, KY
  • Referrals: 0
Re: Pi-Star Configuration for TGIF
« Reply #21 on: March 07, 2020, 07:57:33 pm »
This is a quote from the TGIF help page concerning what I was referring to:

One great use is to be able to switch Talkgroups without having to PTT your radio,so entering a talkgroup number, then pressing the update button, this will move you off the talkgroup to another you have selected.

This function is most use-full, as you can use Selfcare to move you off the talkgroup if it's too noisy or you don't want to do PTT to change it.

You are also able to control and switch Talkgroups, as required using the Talkgroup input box, by typing in the number of a talkgroup you want, and pressing the update button, this will automatically set your hotspot to that Talkgroup, this feature only works if you set your hotspot to redirect to TG9 on most hotspots.


With my radio set on talkgroup 9 this works for me except for my audio passing through to the talkgroup I selected in self care.  I understand what you're saying though.  Thanks!

Offline ke5cdk

  • Administrator
  • Hero Member
  • *****
  • Posts: 1521
  • Location: Texas
  • Referrals: 0
    • NFLARC
  • Call Sign: KE5CDK
Re: Pi-Star Configuration for TGIF
« Reply #22 on: March 14, 2020, 05:37:41 am »
could be a quiet channel?

check here http://tgif.network/active.html
to see if you see your key up
73
DE KE5CDK

Offline W9DWH

  • Newbie
  • *
  • Posts: 3
  • Location: Owensboro, KY
  • Referrals: 0
Re: Pi-Star Configuration for TGIF
« Reply #23 on: March 15, 2020, 03:53:00 pm »
could be a quiet channel?

check here http://tgif.network/active.html
to see if you see your key up

Thanks for the reply Ty. I had someone helping me test it and they said when I keyed up it didn't show my DMR ID and none of my audio passed through.  However it did show a key up.  On self care it was showing me as transmitting on TG 9, where it should be, for controlling my hotspot via the web interface.  I guess the easiest way to find out which end the issue is on is to ask does it work ok for you?  I saw on the self care help page about getting the hotspot itself to default to TG 9.  However it said the procure was well documented on the web.  However none of the search times I've tried has produced the correct results as far as a tutorial. 

Offline sm7tix

  • Newbie
  • *
  • Posts: 2
  • Location: Kristianstad SWEDEN
  • Referrals: 0
  • Call Sign: sm7tix
Re: Pi-Star Configuration for TGIF
« Reply #24 on: April 08, 2020, 02:39:41 pm »
I have some issues to get it working. I use pi-star with my Anytone 578. I have enabled TGIF in pi-star and the hotspot shows up in self care but not correct see picture. When i transmit on tg240 people hear me but i get nothing back. On my Anytone i have digital monitor on both slots. Anyone that know the issue or can point me in the right direction? If you need more info just ask.

Offline sm7tix

  • Newbie
  • *
  • Posts: 2
  • Location: Kristianstad SWEDEN
  • Referrals: 0
  • Call Sign: sm7tix
Re: Pi-Star Configuration for TGIF
« Reply #25 on: April 29, 2020, 10:36:23 am »
i have still the same problem. I will get connected from my pi-star but it is only one way. People hear me and i am seen on dashboard but nothings come back to my pi-star and radio. I have googled and asked and it feels like it is only me.... I have same issue on 3 different pi-star hotposts i tried on. Pi3, Pi3+ and a new Pi4. I have tried to open the tgif port in firewall on pi-star but nothing. Some one give me a clue!

 

Related Topics

  Subject / Started by Replies Last post
6 Replies
3607 Views
Last post August 24, 2020, 11:59:01 am
by WI3J
0 Replies
71 Views
Last post May 04, 2020, 08:29:59 pm
by ke5cdk
0 Replies
31 Views
Last post May 04, 2020, 08:36:56 pm
by ke5cdk
0 Replies
54 Views
Last post August 09, 2020, 07:26:13 pm
by KC0RNP
0 Replies
33 Views
Last post August 09, 2020, 07:26:58 pm
by KC0RNP