TGIF.Network
TGIF DMR Network => TGIF Hotspot Configurartion => Topic started by: KA1MXL on January 20, 2019, 01:41:03 pm
-
I am looking for the instructions that were posted awhile back to configure a dual slot board to work with 2 masters. So I could have TGIF on slot#1 and another master on slot#2.
Thanks
-
Not sure if this is what you are looking for - but I kept it around as I wanted to do the same thing...not had time to test.
Here is a link to the Pi-Star Forum talking about using 2 timeslots.
https://forum.pistar.uk/viewtopic.php?f=5&t=1154&fbclid=IwAR24Fn5R-08Xrel6j5oYJ01FJ___-J-DDlXEhTuwxXiF9KJGXSaG_GgxWWI
-Jason/KD5TJG
-
Thanks Jason, so when using this method I use the 5xxxx tg# is that correct?
-
Hello ... I tried to get this to work and was not able. I follow the directions to the letter. Please let me know if anyone has been able to get it to work.
I also tried these instructions which seems more detailed but it did not work either. Right now for my duplex I can only do BM or TGIF but not both.
Thanks!
-
Here's my DMRGateway config that works fine.
This puts Brandmeister on Slot 1 and TGIF on Slot 2. I recommend you have TGIF on Slot 2 so you can use selfcare since it currently only acts on Slot 2 right now.
The key lines are the 'PassAllTG' lines that mark either slot 1 or slot 2 as the dedicated slot.
[DMR Network 1]
Enabled=1
Address=74.91.114.19
Port=62031
PassAllPC1=1
PassAllTG1=1
Password="passw0rd"
Debug=0
Name=BM_United_States_3102
[DMR Network 3]
Enabled=1
Name=TGIF
Address=tgif.network
Port=62031
Password=passw0rd
Location=0
Debug=0
PassAllPC1=2
PassAllTG1=2
-
Thank you for posting that.
The problem we found trying different things is that when we select DMR gateway, there are no options for the two slots.
Do we need to be running the beta Pistar 4 ?
We have done all the other updates.
-
This is what I see...
-
You have to configure it under Expert mode.
Configuration -> Expert -> DMRGateway
Once you modify something under Expert, don't use anything other than Expert or it'll wipe it back out.
K5MRE
-
Thanks, that was the problem I was going back looking for the options to be there!!!