TGIF.Network
TGIF DMR Network => TGIF General Questions => Topic started by: w4rss on October 03, 2020, 02:50:30 pm
-
What is the numerical prefix needed to establish contact on the TGIF Nework? Is is it 40 plus the talkgroup or 50?
I was under the impression it was 40 but my MD380 configured to use 4031665 does not receive any audio, but I do see some lastheard activity on the 380 screen.
Thanks,
Dick, W4RSS
-
No "numerical prefix" to the talkgroup number is required to access TGIF UNLESS you are using the Pi-Star Gateway function to access multiple networks (IE DMR Gateway selected under DMR Master in Pi-Star).
If you're selecting/just using TGIF_Network as your DMR Master in Pi-Star, you just use the "straight" talkgroup number as listed.
Examples: 31665 for the "Main" TGIF Talkgroup, 101 for TAC-101, 215 for Philadelphia, and so on.
73,
Joe, WB3IHY
-
Thanks, Joe. I appreciate the answer. I'll change my codeplug accordingly.
Dick
W4RSS
-
What is the numerical prefix needed to establish contact on the TGIF Nework? Is is it 40 plus the talkgroup or 50?
I was under the impression it was 40 but my MD380 configured to use 4031665 does not receive any audio, but I do see some last heard activity on the 380 screen.
Thanks,
Dick, W4RSS
[/quote
Dick what about me using a openspot 3 cross mode from fusion to DMR? Seems like I have something wrong setup in the openspot3.
Here is a screenshot of openspot see if you can see anything wrong
Thanks
Ferrell
Status
Connectors
Modem
Settings
Network
openspot3
Connectors
Active connector:
Homebrew/MMDVM
Edit connector:
General settings
Change to Null connector after last call (sec, 0 to disable):
Change after last call from:
Modem Modem or network
Power down instead of changing to Null connector
DMR/Homebrew/MMDVM
Modem receive frequency (MHz):
Modem transmit frequency (MHz):
Modem mode:
Protocol:
Homebrew MMDVM
Server:
Server address:
Port (UDP):
Callsign:
DMR ID:
URL:
Server password: (hide)
Backup server:
Backup server address:
Backup server port (UDP):
Backup server password: (show)
Backup server activate connect timeout (sec):
Auto connect to ID (0 to disable):
Group call Private call
Unlink TG/ref. on auto connect
Auto connect TDMA channel:
Auto connect interval (sec):
DMO mode TDMA channel:
Route cross mode calls to ID:
Group call Private call
Unlink TG/ref. on cross mode DTMF call
Reroute DMR TG9 calls to ID (0 to disable):
Group call Private call
Disable dynamic rerouting
Keepalive interval (sec):
RX timeout (sec):
Connect retry interval (sec):
MMDVM options for DMRplus
Use DMRplus options